COVID-19 Spike protein (S1) ELISA Kit

Mfr.No.

EU2605

Sensitivity

0.938pg/ml

Detection Range

1.563-100pg/ml

Reactivity

Coronavirus

Assay Duration

4 hours

Assay Type

Sandwich

Alternative Names

SARS-CoV-2 S1 ELISA Kit

Detection Method

Double Antibody

Recovery

Add a certain amount of COVID-19 S1 into the sample. Calculate the recovery by comparing the measured value with the expected amount of COVID-19 S1 in the sample.

Sample Type	Recovery Range(%)	Average(%)
serum(n=10)	92-104	98
EDTA plasma(n=10)	85-101	95
Heparin plasma(n=10)	87-105	94

Linearity

Dilute the sample with a certain amount of COVID-19 S1 at 1:2, 1:4 and 1:8 to get the recovery range.

Sample Type	1:2	1:4	1:8
serum(n=10)	95-105%	98-104%	89-100%
EDTA plasma(n=10)	82-95%	85-94%	82-96%
Heparin plasma(n=10)	91-98%	84-100%	86-97%

Species

Coronavirus

Specificity

Specifically binds with COVID-19 S1 , no obvious cross reaction with other analogues.

Standard Curve

This product is detected by QC department and meets performance required in the manual. (Laboratory Humidity: 20%-60%; Temperature: 18°C -25°C; Equilibrate TMB substrate to 37°C before staining. After adding into the ELISA wells, incubate for 15min at 37°C in dark.) Due to different assay environments and operations, assay data below and standard curve are provided for reference. Experimenters should establish standard curve according to their own assay.

STD.(pg/ml)	OD-1	OD-2	Average
0	0.109	0.114	0.111
1.562	0.162	0.17	0.165
3.125	0.198	0.208	0.202
6.25	0.31	0.325	0.316
12.5	0.504	0.529	0.514
25	0.865	0.909	0.883
50	1.395	1.466	1.423
100	2.13	2.238	2.173

Sample Type

Other liquid samples, Serum, Cell culture supernatants, Cell lysate, Plasma

Precision

Intra-assay Precision: samples with low, medium and high concentration are tested 20 times on the same plate.
Inter-assay Precision: samples with low, medium and high concentration are tested 20 times on three different plates.

Item	Intra-assay Precision			Inter-assay Precision
Sample	1	2	3	1	2	3
n	20	20	20	20	20	20
Mean (pg/ml)	3.24	13.14	48.7	3.05	12.72	50.01
Standard deviation	0.16	0.64	2.35	0.14	0.69	2.54
CV(%)	4.95	4.89	4.82	4.69	5.43	5.08

Stability

Perform the stability test for the sealed kit at 37°C and 2-8°C and get relevant data.

ELISA kit(n=5)	37°C for 1 month	2-8°C for 6 months
Average(%)	80	95-100

Notes

For Research Use Only

Usage Notes

Step 1:
Take out the required plate wells, add 50ul Cap/Det Ab into each well, then add 50ul Standard or Sample into individual well. (When adding standard or sample, the disposable tip lightly touches the liquid level. Change the disposable tips for different samples and standards.) Gently tap the plate for 10s to ensure thorough mixing then static incubate for 60 minutes at 37°C.

Washing:
Wash the plate twice without immersion.

Step 2:
Add 100ul HRP-Streptavidin (orange) into each well, seal the plate and static incubate for 30 minutes at 37°C.

Washing:
Wash the plate five times without immersion.

Step 3:
Add 90ul TMB substrate solution, seal the plate and static incubate for 10-20 minutes at 37°C. (Accurate TMB visualization control is required.)

Step 4:
Add 50ul stop solution. Read at 450nm immediately and calculate.

Antigen	S1

Applications	ELISA
Applications Notes	COVID-19 Spike protein ELISA Kit allows for the in vitro quantitative determination of COVID-19 S1 concentrations in serum, plasma, tissue homogenates and other biological fluids.

Storage	2-8°C(Sealed), Don't cryopreserve.

Have you used this product?

Rate it now..!!

SKU	Supplier No.	Size	Your price	Quantity
BHE10808265	EU2605	96T	$520		Add to Cart

COVID-19 Spike protein (S1) ELISA Kit

Contact us to order

Tel

Email

Contact us to order

Tel

Email

Reviews of COVID-19 Spike protein (S1) ELISA Kit

Rate it now..!!